Conductivity Controller Single Channel 8550

Performance Features:

Intelligent Network Model industrial on-line conductivity controller is a top grade meter used for continuous conductivity measurement and control of industrial water flow.

Main Technical Specifications:

Conductivity measurement range:

 0.1cm^-1:  0.00μS-400.0μS,

 1.0cm^-1:  0.00μS-4000μS, 

 10.0cm^-1:  0μS-40.00ms

Temperature measure range: 0-50C

Accuracy: 1.0 %( FS)

Stability: ±2×10^-3(FS)/24h

Auxiliary electrode: 0.1cm^-1, 1.0cm^-1 or 10.0cm^-1 and with the match of PT100 three wires platinum resistance thermometer sensor

Operation pressure of conductance cell: 0-0.5 MPa

Medium temperature: 5-50C

Temperature compensation: automatic compensation, with 25C as standard

Cable composition: RVP+ coaxial cable 75-2 (double shielding)

Cable length: 5m or on agreement of custom length.

Display mode: the conductivity value, temperature, time & date, operating status and current mA values on the LCD (Liquid Crystal Display) screen at the same time

LCD back-light brightness: 5 levels can be selected

4-20mA output: active or passive power, isolated, adjustable,  reversible 4-20mA output

Alarm output mode: open collector/ set electrode, light isolated output: the maximum value 300mA, the maximum value of up-pull voltage 24VDC (direct current), high/low alarm with adjustable of return.

Maximum speed of frequency output: 400pulses/minute, used for driving adding medicine pump

Environmental Condition: temperature: 0-50C; humidity: ≤85% RH

Temperature compensation components: PT100 three wires platinum resistance thermometer sensor

Power supply: DC24V (±4V)

Outline dimension: 96×96×103mm (H x W x D)

Slot dimension for installation: 91×91mm (H x W )

Installation: Panel Mount